Thermal vision GALS SA35

High-performance thermal vision Gals SA35 made in Slovakia
– Easy to use
EN, DE, SK, RU language menu
– Ulis Microbolometer (640×480)
– Noiseless automatic calibration
– 4 profile settings
– Display modes (warm / white, warm / black)
– Automatic image brightness
– All-metal device made of light alloy Ergal
– Water and dust resistant
– Quick-release adapter Ø 48-65mm
– Advanced customer service



The principle of operation of the thermal imaging riflescope is based on conversion of infrared radiation from the object and outputting the image on the display. Software processing the output signal from the radiation receiver has a high frame rate for smooth picture display, in the case of riflescopes it is of paramount importance to make an accurate shot. Thermal vision Gals devices implement a fully automatic detector calibration system without “shutter” to optimize sight in different conditions and do not require any additional manual settings. This ensures quiet operation and automatic adjustment of brightness and contrast under a heat background of the object. The reticle is displayed electronically and is always in the plane of target image. The memory of the riflescope has 9 different reticle configurations with colour changing ability. The device has 4 user profiles where you can save different types of reticle aligning. The design of installed detector is shock-resistant, allowing you to set the riflescope on rifles of any calibre, different sporting weapons or a tripod. 

Technical parameters

Lens of systemF35 1:1,0
Field of view, deg.17,3Hx13,1V
Range of focus1,0m to ∞
Eye relief25mm
Exit pupil19mm
Diopter adjustment±4
Power supply1x 18650
Batteries lifemin 6h
Start-up time˂3s
Operating temperature-25…+40°C
Degree of protectionIP67
Sensor typeUncooled microbolometer FPA
Resolution640 x 480 pixels
Pixel pitch17µm x 17µm
Spectral range8÷12µm
NETD @F1.0 300K≤60mk
Frame rate25Hz
ShutterNo shutter
Microdisplay typeAMOLED
Resolution800 x 600 pixels